The shape of Cationic Polyacrylamide into water
Cationic Polyacrylamide is a water-soluble polymer, white solid particles or fine powder, its application field is very wide, almost related to all aspects of life, the current majority of distributors contact the application of water treatment field. Insoluble in most organic solvents, has good flocculation, can reduce the friction between the liquid, according to the ionic characteristics can be divided into anions, cations, non-ionic and bisexual type four kinds.
In the Water treatment field to be used in a certain proportion of diluted into water solution (generally 1 to 3), dissolution time is about one hours, I suggest that in the water to add Cationic Polyacrylamide products, water should be in a stirring state, the acceleration should be slow (conditions allow the words to choose continuous automatic feeding device as far as possible). The aim is to disperse the Cationic Polyacrylamide particles as far as possible in the water. Cationic Polyacrylamide particles in the water will rapidly rise, such as the acceleration of the cast has not dispersed the meeting caused by the contact with water particles after the rise of the water to wrap the particles, forming a large lump together, it will become paste. Under normal conditions, the Cationic Polyacrylamide is completely dissolved after the colorless transparent, and water is basically mixed with the liquid, with a certain degree of viscosity (a little glue feeling).
Water into the Cationic Polyacrylamide, generally do not see the floc produced, put into a point of material pollution or containing small solids in the water, you can see that there are floc, the resulting floc according to the water quality of the situation is also different.